首頁 ﹥ 商品介紹 > 代理產品

高熱爐業有限公司為日本NACHI真空脫脂清洗裝置台灣總代理 節能環保之工業用清洗設備 熱處理前後清洗的最佳選擇 1.降低運行成本 2.減輕液體管理負擔 3.對應環境問題 本產品特色: 1.維護成本低 2.清洗效果佳 3.單爐清洗容量最多可達800ｋｇ~1000kg 採用不二越公司獨自開發的三重清洗方式,實現包括浸漬工序的強力清洗. 與高性能蒸餾再生裝置的作用相互配合.發揮出清洗液所具有的最大特性.

Features of the NVD Series (1)Linear single room configuration is compact so it is east to replace existing washing equipment. (2)Triple washing (three step cleaning process;primary wash,immersion,secondary wash)provides excellent washing performance. (3)Washing is done with heated solvent so the temperature of the work piece rises at the same time for great drying results. (4)No transfer mechanism inside the equipment reduces frequency of maintenance. (5)High-performance distillation recycler and the primary washing operations keep the solvent clean so it only needs to be refilled not replaced. (6)Thermal oil is heated indirectly for safety.Select heat source from electric,gas or kerosene. (7)Running costs are less than one third those for trichloroethylene and also much lower than other chlorine-based solvents.

• Easy to Oprate
  CP control is unnecessary.
  Carburizing depth is controlled by the time and temperature only.
• High Quality
  High-quality pulse carburizing and super carburizing available.
  Carburization of the narrow gap or the deep hole are possible.
  Without surface oxidation and intergranular oxidation during carburizing.
• Flexibility
  Easy startup without seasoning.
  Flexibly changeable carburizing depth supports wide variety of works.
• High Productivity
  High temperature carburizing is available.
  Unmanned operation is possible.
  Low energy consumption by adopting the cold wall insulation which dissipate less heat.
  Max G.C is 1000kg(NVC-10)
  Compact and space saving design.
• Safe & Clean Enviroment
  No concern about fire because of flameless system.
  No carbon dioxide(CO2) emission.
  Ethylene, which is more secure than acetylene, is used for carburizing gas.

本設備是由日本工業大廠NACHI 不二越所開發生產之真空滲碳爐, 適用於工業用刀,裁刀,手工具,大齒輪,大軸梢及超級大尺寸之汽機車機械零配件之高溫滲碳, 無氧化淬火, 回火處理. 

• 創造安全, 乾淨的環境
  不需擔心火災發生, 可在安全乾淨的環境下作業. 可達成以往的瓦斯滲碳所無法處理之加工程序; 可使熱處理生產線建構上容易許多, 避免3K職場(辛苦 、骯髒 、危險).
• 降低運行成本
  採用ColdWall 斷熱材能, 減少熱損失, 更能節省能源, 且夜間可施行無人自動運轉, 大幅減少管理費用.
• 非熱處理專門人員亦可簡單操作
  由於不須氣氛管理, 滲碳深度只取決於溫度與時間, 管理簡單. 一但設定滲碳模式後, 只需以觸控面板上的按鈕即可操作, 相當容易處理. 設備啟動之後, 由處理到完成為全自動運行.
• 機動性強
  啟動容易, 且擁有各樣機種(由實驗爐到工廠用), 可配合所需目的選擇, 亦有式和多樣少量生產的機種.