真空清洗机 VACUUM DEGREASING EQUIPMENT
相关连结
Click here 
高热炉业有限公司为日本NACHI真空脱脂清洗装置台湾总代理 节能环保之工业用清洗设备 热处理前后清洗的最佳选择 1.降低运行成本 2.减轻液体管理负担 3.对应环境问题 本产品特色: 1.维护成本低 2.清洗效果佳 3.单炉清洗容量最多可达800ｋｇ~1000kg 采用不二越公司独自开发的三重清洗方式,实现包括浸渍工序的强力清洗. 与高性能蒸馏再生装置的作用相互配合.发挥出清洗液所具有的最大特性.
Features of the NVD Series (1)Linear single room configuration is compact so it is east to replace existing washing equipment. (2)Triple washing (three step cleaning process;primary wash,immersion,secondary wash)provides excellent washing performance. (3)Washing is done with heated solvent so the temperature of the work piece rises at the same time for great drying results. (4)No transfer mechanism inside the equipment reduces frequency of maintenance. (5)High-performance distillation recycler and the primary washing operations keep the solvent clean so it only needs to be refilled not replaced. (6)Thermal oil is heated indirectly for safety.Select heat source from electric,gas or kerosene. (7)Running costs are less than one third those for trichloroethylene and also much lower than other chlorine-based solvents.
Features of the NVD Series (1)Linear single room configuration is compact so it is east to replace existing washing equipment. (2)Triple washing (three step cleaning process;primary wash,immersion,secondary wash)provides excellent washing performance. (3)Washing is done with heated solvent so the temperature of the work piece rises at the same time for great drying results. (4)No transfer mechanism inside the equipment reduces frequency of maintenance. (5)High-performance distillation recycler and the primary washing operations keep the solvent clean so it only needs to be refilled not replaced. (6)Thermal oil is heated indirectly for safety.Select heat source from electric,gas or kerosene. (7)Running costs are less than one third those for trichloroethylene and also much lower than other chlorine-based solvents.
真空渗碳炉 VACUUM CABURIZING FURNACE
相关连结
Click here
- Easy to Oprate
CP control is unnecessary.
Carburizing depth is controlled by the time and temperature only. - High Quality
High-quality pulse carburizing and super carburizing available.
Carburization of the narrow gap or the deep hole are possible.
Without surface oxidation and intergranular oxidation during carburizing. - Flexibility
Easy startup without seasoning.
Flexibly changeable carburizing depth supports wide variety of works. - High Productivity
High temperature carburizing is available.
Unmanned operation is possible.
Low energy consumption by adopting the cold wall insulation which dissipate less heat.
Max G.C is 1000kg(NVC-10)
Compact and space saving design. - Safe & Clean Enviroment
No concern about fire because of flameless system.
No carbon dioxide(CO2) emission.
Ethylene, which is more secure than acetylene, is used for carburizing gas.
本设备是由日本工业大厂NACHI 不二越所开发生产之真空渗碳炉, 适用於工业用刀,裁刀,手工具,大齿轮,大轴梢及超级大尺寸之汽机车机械零配件之高温渗碳, 无氧化淬火, 回火处理.
- 创造安全, 干净的环境
不需担心火灾发生, 可在安全干净的环境下作业. 可达成以往的瓦斯渗碳所无法处理之加工程序; 可使热处理生产线建构上容易许多, 避免3K职场(辛苦 、肮脏 、危险). - 降低运行成本
采用ColdWall 断热材能, 减少热损失, 更能节省能源, 且夜间可施行无人自动运转, 大幅减少管理费用. - 非热处理专门人员亦可简单操作
由於不须气氛管理, 渗碳深度只取决於温度与时间, 管理简单. 一但设定渗碳模式后, 只需以触控面板上的按钮即可操作, 相当容易处理. 设备启动之后, 由处理到完成为全自动运行. - 机动性强
启动容易, 且拥有各样机种(由实验炉到工厂用), 可配合所需目的选择, 亦有式和多样少量生产的机种.